Paver Enhancing Sealer works on most concrete pavers, cement tiles, terrazzo floors, and cement surfaces. Formulated for indoor and outdoor applications, Paver Enhancing Sealer is suitable for residential and commercial buildings.

• Made for man-made stone pavers

• Intense color enrichment with oil and water repellency

• Fully impregnating, with no sheen or shine

• Does not affect slip rate — slip testing (ANSI 37.1)

• ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24-hour cure time to check results.  

• Ensure surfaces to be treated are dry, clean and free of residues and the surface temperature is between 40-95°F (5-35°C).  

• Using a low-pressure hand sprayer, foam roller or similar applicator, apply one or more even coat(s). Avoid contact with surrounding areas. Additional coats may be applied at minimum 30-minute intervals.  

• Estimated total application rate: 1 quart per 80 sq. ft. (8 sq. m.). Application rate will vary depending on surface absorption and number of coats.  

• Remove all excess, then after 30 minutes a 2nd coat may be applied.  

• If sprayed, product must be back-rolled into surfaces before 30-minute dwell on all coats.  

• Clean equipment with acetone.  

• Protect from moisture (e.g., rain) for a minimum of 12 hours. Surface may be used with care 12 hours after application.

1 quart per 80 sq.ft. (8 sq.m.) Application rate will vary de-pending on surface absorption and number of coats.