top of page
miteq 104 penetrating sealer

Miteq 104 Penetrating Sealer

Miteq 104 is a solvent based, natural look, this is product is our premium level penetrating sealer suitable for masonry, granite, marble, porcelain, natural stone, concrete, pressed pavers and reconstituted stone.

Sealer 104 is designed to deliver the ultimate protection for masonry surfaces.

It is particularly appropriate against oil/grease (around barbecues, splashbacks and benchtops) or in extremely high traffic areas. It is a natural look sealer for interior and exterior use.

A two coat application, wet on wet, will give sufficient protection provided application guidelines are met.

The application of Sealer 104 will not affect the slip resistance of the surface.

Available in 1, 4 & 20 Litre containers.

Power wash surfaces to be treated.

Remove oil, grease and soil stains with the recommended Miteq cleaner.

Ensure surface is completely dry prior to sealing.

Use material directly from can. Do not dilute.

Always test a small area prior to commencement to ascertain the effect of the sealer on the surface.

Apply to the prepared surface by brush, solvent resistant roller or low pressure spray. Apply evenly, do not allow sealer to pool.

Do not use above 30°C or below 10°C or if rain is imminent.

Sealer 104 can be re-applied at any time following initial application providing the surface has been suitably cleaned and loose material has been removed.

The sealed surface will be suitable for use after 24 hours.

Related Products